Title:Free customization the complete lebus drum and lebus split
sleeve suit your drum
We also supply lebus grooved drum used in all kinds of winchs. The
whole drum details as follows:
1. the groove is cut directly into the body of drum.
2. according to the customer' requirements, the flanges are either
welded or screw-bolted.
3. the groove is available as either lebus-groove or
4. groove geometry is determined by rope construction, diameter and
length ,and by application.
5. the drum is provided with the requested mounting dimensions to
fit the flanges by welding or screw bolting.
Sleeves are used to prevent damage to a drum. It is usually cheaper
to replace a worn out sleeve in stead of replacing or repair the
complete drum assembly.
The lebus split-sleeve system consists of a pair of outer shells
that are bolted or welded onto a smooth drum to provide a grooving
pattern. either lebus parallel grooves can be carved into sleeves.
As with all lebus drums, the grooving in split sleeves is engineer
to suit much the specific rope construction, diameter and length.
We can design the lebus sleeve according to the drum's size and
parameter.So the customer need to provide some paramter as follows:
|the drum's outer diameter||lebus sleeves diameter|
|width between the flanges||320mm 550mm or as your requirement|
|the rotation direction||left or right|
|wire rope diameter and structure||22mm 33mm or any others|
|the material||Q345B or high strength steel|
|the surface hardness||as your requirements|
- We take “Customer first” as our first value, do customized
production as clients’ demand, and upgrade our products according
to the market change.
- We believe that product quality is enterprise brand’s guarantee. To
ensure all the products’ quality.
- We establish quality control department and strictly control the
products’ quality ; a perfect after-service system is the basic
guarantee to clients , for customers’ demand.
- We promise to response within 24 hours ; for your special need, we
also could provide the turn-key project service : installation,
debugging, maintenance, etc.
Q1:What's your terms of payment?
A. T/T 50% deposit and 50% before delivery. we will show you the
photos of products and packages before your pay the balance.
Q2:What's your terms of delivery?
A. EXW, FOB CIF CFR etc
Q3:How about your delivery time?
A. Generally,it will take about 10-30 days after receive your
advance payment.The specfit delivery time depends on your
Q4:Can you produce according to the samples?
A. Yes, we can produce by your sample and technical drawings, we
can build mold and fixtures.
Q5: What's your sample policy?
A. We can supply sample, but the customer have to pay the sample
cost and courier cost.
Q6: Do you test all your goods before delivery?
A. Yes, we have 100% test before delivery.